What functions can a DALI system achieve?


① Dimming: Adjusting the brightness of luminaires.

② Dimming and Color Tuning: Adjusting both brightness and color temperature of luminaires.

③ RGB Color Control: Adjusting light color through the three primary colors.

④ Individual Control: Precise control of each individual luminaire, meeting the needs of accent lighting design and energy-saving applications.

⑤ Group Control: Luminaires in different zones can be grouped and each zone controlled independently.

⑥ Broadcast Control: Unified control of all luminaires.

⑦ Scene Control: Different scene settings can be configured for luminaires as needed. For example, a meeting room can have discussion mode, presentation mode, and off-duty mode.

⑧ Scheduled Control: Brightness or color temperature requirements for different time periods can be pre-programmed into the control system, and luminaires will automatically adjust brightness, color temperature, or on/off status according to the schedule. Whether scheduled control is available depends on whether the DALI system being used has a timer function.

⑨ Sensor Control: Occupancy sensing (lights on when someone arrives, off when they leave) and daylight harvesting (automatically adjusting luminaire brightness based on ambient light changes).

⑩ Data Collection and Diagnostics:

DALI Part 251: Luminaire Data (e.g., manufacturer information, color temperature, color, etc.).

DALI Part 252: Energy Reporting (e.g., how much power the grid provides, how much the driver consumes, how much the luminaire consumes).

DALI Part 253: Diagnostics and Maintenance (divided into LED driver and luminaire sections, e.g., whether the driver has input undervoltage, input overvoltage, overtemperature, and fault count; whether the luminaire has short circuit, open circuit, overload, overtemperature, and fault count, etc.).

⑪ Wireless Control:

Method 1: Add a Wireless-to-DALI Gateway

Bluetooth Mesh or Zigbee-to-DALI gateway, while the LED drivers remain conventional DALI LED drivers.

— Image source: DALI Technical Guide

Method 2: Use DALI+ Devices

DALI+ networks use Thread-based wireless mesh as the communication medium. Thread is a low-power, IP-based wireless mesh network protocol. DALI+ still uses existing DALI commands for communication, but transmission shifts from wired to wireless. Simply put, wired DALI LED drivers become wireless DALI LED drivers, wired DALI sensors become wireless sensors, and wired gateways become wireless gateways, as shown below:

— Image source: DALI Technical Guide

Method 3: Use DALI Gateway TCP Network Interface

By connecting to a router via Ethernet, with the computer and gateway on the same network, wireless or remote control can be achieved, including control via mobile phone.

Summary:

Methods 1 and 2 use products that can be certified by the DALI Alliance; Methods 1 and 3 are the most commonly used approaches today.