Search
Search
/
/
New Product Release | Non-isolated LED Driver, Choose Lifud!
Check category

New Product Release | Non-isolated LED Driver, Choose Lifud!

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-03-12 18:25
  • Views:

(Summary description)Current and CCT Adjustable LED Driver for Linear Light; High Bay Light LED Driver Gen.Ⅳ Series

New Product Release | Non-isolated LED Driver, Choose Lifud!

(Summary description)Current and CCT Adjustable LED Driver for Linear Light; High Bay Light LED Driver Gen.Ⅳ Series

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-03-12 18:25
  • Views:
Information

Lifud has released two new non-isolated LED driver, let's have a look!

1. Current and CCT Adjustable LED Driver for Linear Light: LF-FMRxxxYSⅡ

As Gen.Ⅱ of our hot-sale product LF-FMRxxxYS, a “non-isolated metal linear LED driver” for tri-proof light and linear light, LF-FMRxxxYSⅡ is designed to be plastic casing and supports new functions of adjustable current and tunable white. It can satisfy demands of multiple applications and provide more choices for customers.

Introduction

  • Rated output power:20/40/60W
  • Input voltage:220-240Vac
  • Output voltage:25-57/58-114/115-172Vdc
  • Flicker free
  • Multiple versions: ①non-adjustable current and CCT ②Adjustable current (DIP switch inside or outside the LED driver) ③adjustable CCT (DIP switch)④adjustable current and CCT (DIP switch)
  • Built-in assembly (without end cap) or external assembly (with end cap)
  • Certificates:CB、CE、RCM、CCC
  • Warranty: 5yrs
  • Application: suitable for Class I / II tri-proof light and linear light; often used in underground parking lot lighting, market lighting, factory lighting, basement (such as wine cellar) lighting, etc

LF-FMRxxxYSⅡ supports built-in and external assembly. To achieve convenient brightness adjustment for the light used with built-in LED driver, we design a terminal for the external wire at the output end. With the wire, the DIP switch for adjusting current can be attached on the light instead of inside the LED driver. It supports external wire of 0.5 meter long (diameter of 0.5mm2 ) and will not affect electrical and EMC characteristics of the finished light.

2. High Bay Light LED Driver Gen.Ⅳ Series: LF-FHBxxxYx Ⅳ

UFO non-isolated high bay driver is one of Lifud’s classic non-isolated products, which is also the first non-isolated high power UFO driver in the market. Facing challenge from more and more similar products, Lifud insists on customer-centered, digs out the potential needs of customers, solves application problems and continuously optimize and upgrade products.

LF-FHBxxxYxIV series is the latest generation of our non-isolated high bay driver. This upgrade is designed to solve the general problem of non-isolated driver in application---the light does not go out completely after dimming off.

To solve this problem, we applied our innovative circuit design in LF-FHBxxxYxIV series. With this driver, the light can be dimmed to off and goes out completely (as shown in the left picture below). And we’re very proud that this circuit design was awarded national patent.

 

Besides, the LF-FHBxxxYxIV series also upgrades its appearance, output power range, residual voltage and etc. Multiple functions are available, including over temperature protection, dimming options, negative and positive dimming logic and etc.

 

Introduction

  • Rated Output Power: 80/100/120/150/200/240W
  • Input Voltage: 100-277Vac(YA/B/C)/220-240Vac(YD/E/J)
  • Dim to off, the light goes out completely
  • Flicker free
  • All-round protections: over temperature (slow power derated), over voltage, short circuit
  • High efficiency up to 96%
  • Optional positive and negative dimming logic(YA/C/D/J)
  • Multiple versions: ①YB/YE: non-dimmable; ②YC/YJ: 3-in-1 dimming; ③YA/YD: 3-in-1 dimming+12V aux power supply
  • Low residual voltage: ≤ 1.5KV(L-N: 6kV  L/N-PE: 4kV), no need to remove the screw
  • Adjustable current (via the potentiometer or DIP switch with 4 gears)
  • Certificates:CE、CB、ENEC、RCM、UL、FCC、CCC
  • Warranty :5yrs
  • Application: high bay light, mainly used in industrial lighting

Lifud has been working on improving our living environment and life quality with innovative technology.

From the first LED tube driver to the non-isolated high-power UFO driver, Lifud has always implemented technological innovation with practical actions,  so we can constantly approaching our ambitious vision of "making energy cleaner and more efficient".

If you want to know more about our non-isolated LED driver, please feel free to contact us at sales@lifud.com.

Scan the QR code to read on your phone

Lifud Technology Co., Ltd.

Tel: +86-0755-83739299
Email: sales@lifud.com
Add: Building B, Kutto Industrial Park  No.26 Xinhe Road, Xinqiao Street, Bao’an District, Shenzhen, China